Determination of Interlayer Stresses for Multilayered Materials by using Biquadratic Basic Functions

Authors

  • Zahir Muradoglu Department of Mathematics, Kocaeli University
  • Tatsiana Urbanovich Department of Mathematics, Kocaeli University, Turkey; Department of Higher Mathematics, Polotsk State University, Belarus
  • Vildan Yazici Department of Mathematics, Kocaeli University

DOI:

https://doi.org/10.26713/jims.v10i4.1038

Keywords:

Finite-element analysis, Multilayered Material, Transmission conditions

Abstract

In this paper, we deal with the boundary value problem for the Lame system, modeling the contact problem for a multilayered material. We use biquadratic basic functions to obtain the transmission conditions on the boundaries of interlayer by the Finite Element Method. We analyze the interlayer stresses.

Downloads

Download data is not yet available.

References

V.M. Aleksandrov, Axisymmetric contact problems for a prestressed incompressible elastic layer, Journal of Applied Mathematics and Mechanics 76 (2012), 120 – 124, DOI: 10.1016/j.jappmathmech.2012.03.011.

V.M. Aleksandrov, The integral equations of plane contact problems for high values of the parameter, Journal of Applied Mathematics and Mechanics 75 (2011), 711 – 715, DOI: 10.1016/j.jappmathmech.2012.01.011.

V.M. Aleksandrov and D.A. Pozharskii, The three-dimensional contact problem for a wedgeshaped valve, Journal of Applied Mathematics and Mechanics 76 (2012), 567 – 571, DOI: 10.1016/j.jappmathmech.2012.11.009.

V.M. Aleksandrov and D.A. Pozharskii, The three-dimensional problem of a thin inclusion in a composite elastic wedge, Journal of Applied Mathematics and Mechanics 75 (2011), 589 – 594, DOI: 10.1016/j.jappmathmech.2011.11.013.

V.M. Aleksandrov and D.A. Pozharskii, Three-dimensional contact problems with friction for a composite elastic wedge, Journal of Applied Mathematics and Mechanics 74 (2010), 692 – 698, DOI: 10.1016/j.jappmathmech.2011.01.009.

V.M. Aleksandrov and V.Yu. Salamatova, The bending of a circular membrane on a linearly deformed foundation, Journal of Applied Mathematics and Mechanics 75 (2011), 472 – 475, DOI: 10.1016/j.jappmathmech.2011.09.011.

R.C. Batra and W. Jiang, Analytical solution of the contact problem of a rigid indenter and an anisotropic linear elastic layer, International Journal of Solids and Structures 45 (2008), 5814 – 5830, DOI: 10.1016/j.ijsolstr.2008.06.016.

F.M. Borodich, Contact problems at nano/microscale and depth sensing indentation techniques, Mater. Sci. Forum 662 (2011), 53 – 76, DOI: 10.4028/www.scientific.net/MSF.662.53.

F.M. Borodich, B.A. Galanov, S.N. Gorb, M.Y. Prostov, Y.I. Prostov and M.M. Suarez-Alvarez, Evaluation of adhesive and elastic properties of materials by depth-sensing indentation of spheres, J. Appl. Phys. A: Mater. Sci. Process. 108 (2012), 13 – 18, DOI: 10.1007/s00339-012-6982-7.

F.M. Borodich, B.A. Galanov, Y.I. Prostov and M.M. Suarez-Alvarez, Influence of the noslipboundary condition on indentation of an elastic half-space by a rigid cone inpresence of molecular adhesion, PMMJ. Appl. Math. Mech. 76 (2012), 744 – 753.

F.M. Borodich, B.A. Galanov and M.M. Suarez-Alvarez, The JKR-type adhesive contact problems for power-law shaped axisymmetric punches, Journal of the Mechanics and Physics of Solids 68 (2014), 14 – 32, DOI: 10.1016/j.jmps.2014.03.003.

F.M. Borodich and L.M. Keer, Contact problems and depth-sensing nanoindentation for frictionless and frictional boundary conditions, Int. J. Solids Struct. 41 (2004), 2479 – 2499.

G. Duvant and J.L. Lions, Inequalities in Mechanics and Physics, Springer, Berlin (1989).

A. Hasanov and Z. Seyidmamedov, Qualitative behaviour of solutions of Signorini problem with perturbing the unknown boundary II: The multigrid method, Applied Mathematics and Computation 109 (2000), 261 – 271, DOI: 10.1016/S0096-3003(99)00032-6.

A.A. Kalyakin, Interaction of a die with a layered elastic foundation, Journal of Applied Mechanics and Technical Physics 47(3) (2006), 446 – 454, DOI: 10.1007/s10808-006-0076-2.

A. Lee and K. Komvopoulos, Dynamic spherical indentation of elastic-plastic solids, International Journal of Solids and Structures 146 (2018), 180 – 191, DOI: 10.1016/j.ijsolstr.2018.03.028.

Z. Seyidmamedov, Finite-element analysis of frictionless contact problem for a laminated medium, Mathematics and Computers in Simulation 58 (2002), 111 – 123, DOI: 10.1016/S0378-4754(01)00331-7.

Z. Song and K. Komvopoulos, Adhesive contact of an elastic semi-infinite solid with a rigid rough surface: Strength of adhesion and contact instabilities, International Journal of Solids and Structures 51(6) (2014), 1197 – 1207, DOI: 10.1016/j.ijsolstr.2013.10.039.

Z. Song and K. Komvopoulos, Delamination of an elastic film from an elastic-plastic substrate during adhesive contact loading and unloading, International Journal of Solids and Structures 50(16-17) (2013), 2549 – 2560, DOI: 10.1016/j.ijsolstr.2013.03.002.

T.M. Urbanovich, On the exceptional case of the characteristic singular equation with Cauchy kernel, Differ. Equ. 52(12) (2016), 1650 – 1654, DOI: 10.1134/S0012266116120119.

T. Urbanovich and Z. Muradoglu, On the solution of the homogeneous linear conjugation problem with singularities of noninteger order, Advances in Differential Equations and Control Processes 19(2) (2018), 127 – 138.

A. Wagih, P. Maimí­, N. Blanco and D. Trias, Predictive model for the spherical indentation of composite laminates with finite thickness, Composite Structures 153 (2016), 468 – 477, DOI: 10.1016/j.compstruct.2016.06.056.

H. Xu and K. Komvopoulos, Surface adhesion and hardening effects on elastic-plastic deformation, shakedown and ratcheting behavior of half-spaces subjected to repeated sliding contact, International Journal of Solids and Structures 50(6) (2013), 876 – 886, DOI: 10.1016/j.ijsolstr.2012.10.009.

Downloads

Published

2018-12-31
CITATION

How to Cite

Muradoglu, Z., Urbanovich, T., & Yazici, V. (2018). Determination of Interlayer Stresses for Multilayered Materials by using Biquadratic Basic Functions. Journal of Informatics and Mathematical Sciences, 10(4), 635–645. https://doi.org/10.26713/jims.v10i4.1038

Issue

Vol. 10 No. 4 (2018)

Section

Research Articles

License

Authors who publish with this journal agree to the following terms:
  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a CCAL that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.